Applied SunPower™ Technology
SunPower™ is the compounded Technology of Energetic Wave Generator, TVSS and RPC functions making SunPower™ the best of parallel electricity saving devices.
| EWG: Energetic Wave Generator |
TVSS: Transient Voltage Surge Suppressor |
RPC: Reactive Power Control |
|---|---|---|
1. The Energetic Wave Generator has a one of a kind semi-conductor chip that improves the waveform of electric pure sine waves that are damaged by harmonics and transients. |
2. TVSS function is to protect and suppress damage of the obsolete electrical conduits caused by transient voltage surges and spikes. It also supplies stabilised electricity. |
3. The Smart RPC function will make machines or motors run efficiently by reducing inductance at the loaded electrical charge on machines or motors. This improves the power factor itself. |
1. Reducing Current Value by improving conductivity
The emitted energy waves relieve impedance in an inductive electric wire, subsequently reducing electric current values by improving conductivity through disposing electric particles. This arrangement provides safe and regular electricity streaming in an electric wire. The ampere reduction ratio resulting from this phenomenon improves the power factor.
Illustrating the sine wave's fundamental relationship to the circle.
2. Reducing Damages and over energy consume of facilities by suppressing Surge
The function to suppress surge by TVSS compensates transient suspension of power supply, protects facilities from damage and reduces noise.
3. Reducing Reactive Power by Auto Power Factor Control
Smart RPC improves power factor automatically by making Phi narrow between voltage wave progression and current wave progression which traces sine wave shape. It improves the power effectiveness of the inductive load by reducing reactive power (vary), one of A/C impedance.
Typical Characteristics of SunPower™ Technology:
Why buy SunPower™?
- Corrects the electrical/Energetic Wave Forms.
- TVSS: Transient Voltage Surge Suppression.
- Power factor improvement: Reactive Power Control.
- Suppressing harmful waves: harmonics, noise, operation failures.
- Keeping stable voltage value to the end load.
Problems in Decreasing Voltage Method that most Other products use:
Don't use an inferior technology on your equipment
- Reducing voltage by 1% causes a 3% illumination decrease, 2% motor torque loss and a 2% electric heat increase.
- Supplying power under low voltage causes machinery/equipment damage.
- Longer operational time is required for finishing the same job, increasing electricity consumption.
